Granite effect
This special spray paint gives decorative objects a solid granite effect typical of stone. An amazing transformation, especially for objects that are not typically made of stone. Pre-coating with belton spectRAL (top coat) is recommended. The belton granite effect can be used on a wide variety of materials, both indoors and outdoors. After 6 hours, be sure to coat the granite effect with belton clear lacquer for all effects.
Realistic stone design.
- Stone design for stone-atypical painted objects
- For a solid, elegant granite look
- Very realistic, like granite
- Weather-resistant after coating with a clear coat
Please note: The granite effect achieved depends largely on the existing substrate or the pre-coated colour.
Colour selection
The colours used appear differently on the screen and are therefore not binding for technical reasons.
granite grey
400 ml
Art. No.: 323351
sand
400 ml
Art. No.: 323352
travertine tan
400 ml
Art. No.: 323353
obsidian
400 ml
Art. No.: 323355
granite white
400 ml
Art. No.: 323359
There is no colour selection.
Properties
Paint structure
- Wood / wood based
1. belton basic Wood primer
2. Pre-coating with belton spectRAL (recommended)
3. belton special Granite effect
4. belton Clearcoat for all effects (after 6 hours) - Ferrous metals / Steel
1. belton basic Anti-corrosion primer (outdoor)
2. belton basic Universal primer
3. Pre-coating with belton spectRAL (recommended)
4. belton special Granite effect
5. belton Clearcoat for all effects (after 6 hours) - Plastics (paintable)
1. belton basic plastic adhesion primer
2. Pre-coating with belton spectRAL (recommended)
3. belton Granite effect
4. belton Clearcoat for all effects (after 6 hours) - Polystyrene
1. belton basic ploystyrene primer
2. Pre-coating with belton spectRAL (recommended)
3. belton Granite effect
4. belton Clearcoat for all effects (after 6 hours)
► Recommendation: It is necessary to apply several layers of belton clearcoat for all effects (Art. No. 323 399) to achieve long term granite effect. Please check the compatibility of plastic surfaces. All other surfaces, such as e.g. stone, clay, ceramics, glass, rattan/bast, card/paper need to be primed with belton universal primer. The surface to be painted must be clean, dry and free of grease.
Do not spray onto objects coated with artificial resin because the paint may lift.
- Binding agent base: Water-based special resins
- Spray application: 1-2 evenly thin layers
- Layer thickness: 120-150 μm
- Spray distance: 40-50 cm
- Drying times:
- between the separate coats: approx. 30 min.
- dust-dry: after approx. 3 hours
- fast-to-handling: after approx. 6 hours
- dry-hard: after approx. 48 hours - Recoating:
- with itself: at any time
- with clearcoat: after 6 hours