Vintage paint
Water-based vintage paint for the trendy shabby-chic look. Ideal for chests of drawers, cupboards and decorative objects made of wood and metal. After painting and a 20-minute drying phase, sand the paint (recommended P180) until the required vintage look is achieved. For use indoors, and also outdoors if a clear coat is applied.
Trendy shabby-chic look.
- Water-based, odour-reduced spray paint
- For a trendy shabby-chic effect
- Ideal for chests of drawers, cupboards etc.
- Sand with P180 once dry
Colour selection
The colours used appear differently on the screen and are therefore not binding for technical reasons.
lime white
400 ml
Art. No.: 323420
antique white
400 ml
Art. No.: 323427
mint green
400 ml
Art. No.: 323422
sky blue
400 ml
Art. No.: 323423
rose red
400 ml
Art. No.: 323424
silver grey
Art. No.: 323426
There is no colour selection.
Properties
Paint structure
- Wood / Wood based
1. Roughen slighting (better adhesion)
2. belton special Vintage paint
3. Sand with sandpaper (recommended P180)
4. belton Clearcoat (optional) - Ferrous metals / Steel
1. Remove rust, sand/roughen
2. belton special vintage paint
3. Sand with sandpaper (recommended P180)
4. belton Clearcoat (recommended) - Plastics (paintable)
1. belton Plastic adhesion primer
2. belton special vintage paint
3. Sand with sandpaper (recommended P180)
4. belton Clearcoat (recommended) - Old paintwork
1. Sand old paint, check compatibility
2. belton Universal primer
3. belton special vintage paint
4. Sand with sandpaper (recommended P180)
5. belton Clearcoat (recommended)
► Note: Please check the plastic surfaces for compatibility. Prime all other surfaces such as stone, clay, ceramic, rattan/bast, card/paper with the belton universal primer. Do not spray onto surface coated with artificial resin because this might cause the paint to lift. The surfaces must be clean, dry and grease-free before they are painted.
- Binding agent base: Special water-based dispersion
- Spray application: 2-3 evenly thin layers
- Layer thickness: ca. 30 – 40 μm per layer
- Spray distance: 15-25 cm
- Drying times:
- dust-dry: after approx. 10 min.
- can be sanded: after approx. 20 min.
- dry-hard: after approx. 12 hours - Recoating:
- can be painted over with itself at any time
- with clearcoat (belton Clearcoat)
after sanding vintage effect and removing sanding dust