Frost flower effect

Water-based effect paint to create an individual frost flower effect that looks like frozen ice. The effect works best on smooth, non-absorbent substrates, such as on glass, metal and plastic. The frost flower effect may change under the influence of humidity. With clearcoat you preserve the frost flower effect. Without clearcoat, the paint is washable without residue. Recommendation: Cover with belton clearcoat for all effects after 60 min.


Safety data sheet


Properties

Application: The surfaces must be smooth, clean, dry and free of grease. If necessary, sand uneven surfaces first. The frost flower effect is painted in even, thin layers. Humidity, temperature and layer thickness influence the effect impact. The effect becomes visible after 3-10 minutes. Always apply belton clearcoat after 60 minutes (Art. No.323399) to ensure durable resistance. The result looks like the structure of frozen ice.
Product benefits: A unique frost flower effect for individual decorative paintwork, especially for indoors
The effect is best created on smooth, non-absorbent surfaces
Humidity can impact on the effect
The effect is conserved with clearcoat; the paint can be simply wiped off if no clearcoat is applied
Good adhesion and fast drying
The unique effect becomes visible as it is drying
The result looks like the structure of frozen ice
Recommendation: Apply belton clearcoat (Art. No. 323399)
Binding agent base: Water thinnable polyurethane dispersion
Spray application:    

Paint with frost flower effect:
2-3 thin spray coats: approx. 30 - 40 μm
Spray distance: 15-25 cm
The effect becomes apparent approx. 3-10 minutes after it starts drying

Apply a coat of clearcoat:
Recommendation: Apply a coat of clearcoat after 60 min. Drying:
2-3 thin spray coats: approx. 30 - 40 μm
Spray distance: 15-25 cm

Drying times:     Dust dry: after approx. 20 min.
Dry to touch: after approx. 60 min.
(Recommendation: apply a coat of clearcoat)
Completely dry: after approx. 24 hours
Recoating:with itself: at any time
with belton clearcoat after 60 min.
Paint structure:

Glass / ceramic / clay (smooth surfaces):
1. belton basic universal primer or belton free primer white matt (optional)
2. belton special frost flower effect (Art. No. 323471)
3. Recommendation: belton clearcoat for all effects (Art. No. 323399)

Metal:
1. belton basic universal primer white matt (Art. No. 323502) (optional)
2. belton special frost flower effect (Art. No. 323471)
3. Recommendation: belton clearcoat for all effects (Art. No. 323399)

Plastic:
1. belton basic plastic primer (please check plastic for compatibility)
2. belton special frost flower effect (Art. No. 323471)
3. Recommendation: belton clearcoat for all effects (Art. No. 323399)

Note:If the object which needs to be painted (e.g. glass) is pre-painted in colour, this colour shines through after painting with the frost flower effect. Depending on the choice of colour, very special, individual colour effects can be achieved.
Please check the plastic surfaces for compatibility. If necessary, prime all other surfaces such as stone, clay, ceramic, glass, rattan/bast, card/paper with the belton universal primer.
Do not spray onto surface coated with artificial resin because this might cause the paint to lift. The surfaces must be clean, dry and grease-free before they are painted.

Colour tones

The colours used appear differently on the screen and are therefore not binding for technical reasons.

ColourColour tones Art.-No.
400ml
Frost flower effect323 471

Stand: 21.10.2021

Copyright © 2007-2013, Peter Kwasny GmbH, Gundelsheim, Deutschland. Alle Rechte vorbehalten.