Plastic adhesion primer
Special adhesion agents for pretreatment of paintable hard plastics or other conventional plastic parts. Thanks to the light pigments, it is clear where the strong adhesive spray has already been applied during
the process.
Safety data sheet
Properties
| Application: | Primer and adhesive agent for hard plastics and plastic parts that are to be painted. The belton synthetic priming coat allows conventional plastic parts (PP, EPDM, ABS, PC, PPO, PA, PVC, PUR, PBT(B) and UP-GF) to be painted and it results in an excellent adhesion for the subsequent application of paint. (please observe the label information) |
|---|---|
| Product benefits: | Specially for plastics Very good adhesion for subsequent coats Easy to process Fast drying Very easy to sand Very economic Slightly silvery pigmentation shows where primer was applied |
| Binding agent base: | Special polymers |
| Spray application: | Apply 1 thin cross coat: 3-5 μm Spray distance: 15-25 cm |
| Drying times: | dust-dry: after approx. 15 min.; the recoat fast-to-handling: after approx. 40 min. dry-hard: after approx. 12 hours |
| Recoating: | with itself: at any time with all other belton paints: at any time |
| Paint structure: | 1. belton basic plastic adhesion primer 2. Top coat / belton spray paint (colour tone) |
| Note: | Please observe the information on the label about which plastics are suitable for the belton plastic adhesion primer. Always check compatibility. Before priming, clean, degrease and remove any rust from objects that are to be painted. To ensure optimum adhesion of the paint, sand before and after priming. The surface to be painted must be clean, dry and free of grease. |
Colour tones
The colours used appear differently on the screen and are therefore not binding for technical reasons..
| Colour | Colour tones | Art.-No. 400ml | Art.-No. 150ml |
|---|---|---|---|
 | transparent (slightly silvery pigmentation) | 323 505 | 326 076 |